Webshop » Accessories » Building materials » Tubes

Prices given are in EUR excluding VAT

English | Deutsch | Dansk | Française

DPP CRP Micro tubes pultruded
Suitable as steering rods, guiding tubes, spar tubes in airplane modellling, reinforcement of frame - and structural elements.

Pultruded carbon-fibre rods by Van Dijk Pultrusion Products from HT carbon fibres (T300 or equivalent) and epoxy resin are drawn continuously through a die. This production method causes the fibres to be oriented unidirectionally, i.e. along the length of the pultruded form. The result is a high fibre volume fraction of 62 % with a very low air voids content and a heat distortion temperature of 120 °C.

Tolerances:



DPP Carbon rods:

ca. 1–3 % Diameter
DPP Carbon tubes:
Up to 1 mm outer-Ø: outer-Ø ± 0,03 mm, inner-Ø ± 0,03 mm
1,5 mm - 2,5 mm outer-Ø: outer-Ø ± 0,05 mm, inner-Ø ± 0,03 mm
Over 3 mm outer-Ø: outer-Ø ± 0,10 mm, inner-Ø ± 0,03 mm
A pre-treatment of the adherent is not nescessary. We do recommend to use epoxy resin or cyanacrylate (superglue) for the bonding itself.