SPIN is a top end series of controllers for brushless motors. SPIN controllers can work with all type of batteries NiCd, NiMh, LiPo, LiIon, and LiFe (A123). As a result of the legendary Jeti reliability and wide of possible programing options for all categories of flight, including elicopters, Jeti SPIN controllers are the standard equipment of the majority of top competition
In the development of new brushless speed controllers, we have tried to more than comply with the requirements of users, together with simplicity and ease of use, which we currently offer.
All standard SPIN controllers include a new type of voltage stabilizer for receiver and servo power, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of BEC for models operating at higher voltages. A significant factor is that the BEC circuit maintains its full current capability right up to the maximum voltage.
The SPIN series of controllers can be programed using the JETIBOX. Connecting a SPIN controller and JETIBOX allows a nearly unlimited range of programing options to help optimise the power system for any model.
The SPIN OPTO controllers have electrically isolated input and output, and it is therefore necessary to use a separate power supply for the receiver and servos this minimizes interference to the receiver.
SPIN controllers are easy program without a computer, all you need is JETIBOX. SPIN controllers record operating data during operation, which allows you to examine the data and fine tune the settings of your aeroplane or helicopter. The controller collects data on the temperature of the controller, the maximum and minimum current during the flight, motor speed, and a number of other readings are stored by the controller, and can be read by the JETIBOX immediately after the flight.
This will allow you to set the changes and fly again you can immediately see the results. Fine tuning your power system has never been easier.