Webshop » Fixed wing models » Foam Models » Warbirds

Webshop » Special offers

Prices given are in EUR excluding VAT

Special offer - save 13 %

English | Deutsch | Dansk | Française

World War I brought with it the dawn of air-to-air combat. Of the many airplanes that saw action, only a handful actually became legends. The Royal Aircraft Factory S.E.5a was one of them. Flown by many of the British and American aces of the time, it was instrumental in regaining and maintaining Allied air superiority from 1917 through war’s end. Now you can take to the skies with this outstanding sport scale recreation of the ParkZone® RAF S.E.5a. Its winning combination of scale realism and easy-going flight characteristics will capture the heart of everyone who loves aviation classics.

Needed to Complete

• A 4+ channel DSM2/DSMX compatible Transmitter

Specification:

Wingspan	37.1 in (943mm)
Length	30.0 in (760mm)
Flying Weight	40.6 oz (1150g)
Motor	480-size 960Kv Brushless Outrunner (installed)
Radio	4-channel radio system minimum
Servos	4 digital servos (installed)
Prop	10x8 (included)
ESC	30-Amp Pro Switch-Mode BEC Brushless ESC (installed)
recommended battery	3S 1800mAh 11.1V LiPo
Approx. Assembly Time:	1 hour

Produktbeskrivelse:
1 Verdenskrig blev starten på air-to-air combat, men kun en håndfuld at de involverede fly opnåede status som legender i den diciplin. S.E.5a fra Royal Aircraft factory er en af disse legender. Den blev fløjet af både engelske og amerikanske piloter og var medvirkende til at genvinde og bevare de allieredes overlegenhed fra 1917 til krigens afslutning. ParkZone® giver nu dig mulighed for at flyve modellen af RAF S.E.5a og kombinationen af skala og stabile flyveegenskaber vil begejstre alle med et godt øje til disse klassikere.

Følgende skal fremhæves omkring denne model:

• Indbygget Spektrum™ AR600 DSM2/DSMX receiver
• Styres over 4 kanaler: Gas, højderor, krængror og sideror
• Indbygget 960Kv 480 brushless outrunner motor
• Indbygget E-flite® 30A Pro Switch-Mode ESC
• Alle servoer er indbygget
• Durable Z-Foam™ konstruktion
• Skala detaljer som maskingevær, udstødning og cockpitsdetaljer
• Autentisk World War I bemaling/stafering
• 3S 1800mAh 15C Li-Po batteri medfølger
• 2- to 3-celles Li-Po lader medfølger
• Modellen er desuden en af de mange modeller som er indeholdt på Phoenix Flight Simulator

Du skal bruge følgende for at komme i luften:
4+ kanals DSM2- eller DSMX-compatible sender som f.eks. DX6i, DX7s, DX8 eller en sender med Spectrum DSM2 modul.



Specification:

Wingspan	37.1 in (943mm)
Length	30.0 in (760mm)
Flying Weight	40.6 oz (1150g)
Motor	480-size 960Kv Brushless Outrunner (installed)
Radio	4-channel radio system minimum
Servos	4 digital servos (installed)
Prop	10x8 (included)
ESC	30-Amp Pro Switch-Mode BEC Brushless ESC (installed)
recommended battery	3S 1800mAh 11.1V LiPo
Approx. Assembly Time:	1 hour

Spareparts:

Below is a list with spareparts available. We haven't included everything here, so look around or give us a call if you can't find what you need.