Webshop » Helicopters » Micro helicopters » Spares

Prices given are in EUR excluding VAT

Special offer - save 6 %

English | Deutsch | Dansk | Française

Key Features

• AS3X Flybarless System
• Powerful 6730Kv brushless inrunner motor
• Shaft-driven, variable-pitch tail rotor
• Symmetrical 135mm main rotor blades
• Spektrum 2.9 gram linear long-throw cyclic servos
• Spektrum 2.9 gram linear performance tail servo
• Strong, lightweight airframe
• Carbon fiber main shaft and tail boom
• Sleek body with sharp 130 X graphics
• Includes E-flite® 2S 7.4V 300mAh 35C Li-Po battery
• Includes Celectra 2S 7.4V DC Li-Po Charger with AC adapter
• Requires a 6+ channel computer DSM2®/DSMX® transmitter, sold separately

Video

Needed To Complete:
DX6i, DX7s, DX8 or transmitter with Spektrum DSM2 module.

We recommend the following setup for beginners on DX6i:
D/R & Expo
0-AILE D/R 50% and Expo 40% (manual said 85% and 40%)
0-ELEV D/R 50% and Expo 40% (manual said 85% and 40%)
0-RUDD D/R 70% and Expo 40% (manual said 80% and INH)
Thro Curve
NORM 0%, 40%, 55%, 65%, 75%.
(according to manual: 0%, 40%, 60%, 68%, 75%)
Pitch Curve
NORM 50%, 55%, 60%, 70%, 80%.
(according to manual: 30%, 40%, 50%, 75%, 100%)
Can also be used with transmitters equipped with spectrum moduls or DX7s / DX8.

Specs

• Rotor Type: Collective Pitch Single Rotor
• Experience Level: Advanced
• Completion Level: Bind-N-Fly
• Recommended Environment: Indoor/Outdoor
• Type: Flybarless
• Swashplate Type: 140 Degree
• Main Rotor Diameter: 12.8 in (325mm)
• Main Rotor Blade Length: 135mm
• Main Blade Material: Plastic
• Tail Rotor Diameter: 3.00 in (76mm)
• Tail Drive: Torque Tube
• Length: 12.0 in (305mm)
• Width: 2.00 in (51mm)
• Height: 4.80 in (122mm)
• Flying Weight: 3.77 oz (107 g)
• Approximate Flight Time: 4 minutes
• Number of Channels: 6

Remember to balance the mainblade and tailblades.

Den leichtesten 3D Heli der Welt gibt es ab sofort in der überarbeiteten Version 2. Ausgestattet mit dem neuen überarbeiteten AS3X 3-Achs Kreiselsystem, stärkeren LiPos, einem größeren Heckrotor und zusätzlichen Taumelscheiben-Dämpfern, lässt sich der mCP X in der Version 2 noch präziser durch die 3D Figuren rocken. Natürlich eignet er sich immer noch perfekt, um von einem normalen zu einem 3D Heli aufzusteigen.

Der mCP X verfügt über ein voll funktionsfähiges Flybarless System. AS3X und CCPM Mechanik erlauben es, mit diesem Hubschrauber ein anspruchsvolles Kunstflugprogramm inklusive Rückenflug zu zelebrieren.

Mechanik und die Elektronik arbeiten mit einer hohen Präzision, so dass selbst schwierige Manöver wie Rückenflug, Loopings, Flips, Rollen, Funnels und Hurricanes gut zu fliegen sind. Der Blade mCP X 2 kann erfolgreich Outdoor oder Indoor geflogen werden. mCP X 2 – Flybarless Level 2!

Produktbeskrivelse:
Blade 130 er en nyhed i sub-micro klassen særdeles velegnet til 3D flyvning og manøvre som piro flips, tic tocs, hurricanes, funnels og mange flere udføres med den energi og præcision der typisk kendetegner langt større modeller. En væsentlig årsag til denne performance er AS3X® (Artificial Stabilization 3axis) Flybarless Systemet som via 3-axis MEMS sensorer og et eksklusive flight control software sikre hurtig respons og neutral stabilitet som giver følelsen af at flyve en væsentlig større model. Dertil kommer en stærk brushless motor og "shaft-driven" halerotor som gør det muligt at presse den til det yderste både inden- og udendørs.

Du skal bruge følgende for at komme i luften:
En sender med mindst 6 kanaler der er DSM2 eller DSMX-compatible som f.eks. DX6i, DX7s, DX8 eller en sender Spectrum DSM2 modul.

Læs vores anbefaling til opsætning af Helikopteren

Husk at afbalancerer rotorblade og halerotorblade.
Vi har oplevet at de er meget ude af balance ved leveringen.
Små stykker tape rund om forkanten kan fint anvendes.
Sådan afbalancer du din heli

Info om "Tail Wag"

Video     Manual     3-Axis Gyro Access Instructions

Key Features

• AS3X Flybarless System
• Powerful 6730Kv brushless inrunner motor
• Shaft-driven, variable-pitch tail rotor
• Symmetrical 135mm main rotor blades
• Spektrum 2.9 gram linear long-throw cyclic servos
• Spektrum 2.9 gram linear performance tail servo
• Strong, lightweight airframe
• Carbon fiber main shaft and tail boom
• Sleek body with sharp 130 X graphics
• Includes E-flite® 2S 7.4V 300mAh 35C Li-Po battery
• Includes Celectra 2S 7.4V DC Li-Po Charger with AC adapter

Specs

• Experience Level: Advanced
• Swashplate Type: 140 Degree
• Main Rotor Diameter: 12.8 in (325mm)
• Main Rotor Blade Length: 135mm
• Main Blade Material: Plastic
• Tail Rotor Diameter: 3.00 in (76mm)
• Tail Drive: Torque Tube
• Length: 12.0 in (305mm)
• Width: 2.00 in (51mm)
• Height: 4.80 in (122mm)
• Flying Weight: 3.77 oz (107 g)
• Approximate Flight Time: 4 minutes
• Number of Channels: 6

Der medfølge en skruetrækker men den passer ikke til de små skruer. Derfor anbefaler vi en god skruetrækker der passer.

Recommended products:

Below is a list of our recommendations for this Blade 130 X BNF. All Head RC recommendations are tried and tested which helps you get what you need.

Upgrades and tuning:

Below is a list with some of the upgrades and tuning parts available. We haven't included everything here, so look around or give us a call if you can't find what you need.

Spareparts:

Below is a list with spareparts available. We haven't included everything here, so look around or give us a call if you can't find what you need.